Lixin (Wan'an) Intelligent Display Technology Co., Ltd. presents the LS030T04-R-V1, a 3.0-inch TFT-LCD module specifically designed for mobile phone applications. This module features a compact design, high-quality display characteristics, and comprehensive specifications for reliable integration.
Product Overview
Model: LS030T04-R-V1
Document: LS030T04-R-V1(SPEC).pdf
Release Date: 2017-07-28
Upload Date: 2025-12-23
Module Type: COG (Chip-on-Glass) + FPC
Application: Mobile Phone
Material: ROHS Compliant
General Specifications
| Item | Standard Value | Unit |
|---|---|---|
| LCD Type | TFT Transmissive | - |
| Driver Element | TFT Active Matrix | - |
| Number of Dots | 320×(RGB)×240 | Dots |
| Pixel Arrangement | RGB Vertical Stripe | - |
| Dot Size (W×H) | / | mm |
| Dot Pitch (W×H) | 0.146×0.146 | mm |
| Active Area | 36.84×65.52 | mm |
| Viewing Area (W×H) | 39.34×67.81 | mm |
| Glass Area (W×H) | / | mm |
| LCD Duty | / | - |
| LCD Bias | / | - |
| Viewing Direction | 6:00 O'CLOCK | - |
| Control IC | ILI8961 | - |
| Module Size (W×H×T) | 42.64×74.51×2.25±0.1 | mm |
| Approx. Weight | TBD | g |
| Back Light | 4 White LED | - |
Module Structure and Features
1. Display Structure:
- Single Display Structure: TFT MODULE + BL (Backlight)
- Main LCD: 3.0-inch TFT LCD with FULL 65K Color
- Technology: One bare chip with gold bump (COG Technology)
- Interface: SPI 8 BIT RGB interface
2. TFT Features:
- Structure: TFT PANEL + IC + FPC + BL
- Type: Transmissive Type LCD
- Outputs: 240 dot-source and 960 dot-gate outputs
- Color Selection: 65K Color can be selected by software
- Backlight: White LED back light
- Interface: SPI 8BIT RGB interface
3. Applications:
- Primary: Mobile Phone
- Secondary: Portable devices requiring compact displays
Mechanical Drawing Specifications
Overall Dimensions:
- Module Size: 42.64±0.1(W) × 74.51(H) × 2.25±0.1(T) mm
- Active Area: 36.84(W) × 65.52(H) mm
- Viewing Area: 39.34(W) × 67.81(H) mm
Key Mechanical Features:
- Display Type: Main LCD: 3.0" TFT, Transmissive
- Operating Temperature: -20°C to 70°C
- Storage Temperature: -30°C to 80°C
- Backlight: 4 CHIP-WHITE LED
- Unspecified Tolerances: ±0.2mm
FPC Specifications:
- Connector: 40-pin FPC connector
- Pitch: 0.5mm
- Pin Count: 39 pins (19.5mm length)
- Reinforcement: PI补强 (PI reinforcement) T0.3MM
Circuit Diagram Notes:
- Single Layer Area: 960×240单层区
- Design Date: 2015.03.25
- Software: Tutodesk教育版产品制作
- Approvals: 电子审核, 结构审核, 设计
RGB Interface Pin Function (40-pin)
| NO. | SYMBOL | Description |
|---|---|---|
| 1 | VCOM | VCOM voltage |
| 2 | K | LED negative |
| 3 | A | LED positive |
| 4 | DRV | capacitor |
| 5 | VCAC | capacitor |
| 6 | COMDC | capacitor |
| 7 | FRP | capacitor |
| 8 | AGND | capacitor |
| 9 | VGL | capacitor |
| 10 | VGH | capacitor |
| 11 | V4M | capacitor |
| 12 | V4P | capacitor |
| 13 | VINT3 | capacitor |
| 14 | VIN4 | capacitor |
| 15 | V3M | capacitor |
| 16 | V3P | capacitor |
| 17 | VINT1 | capacitor |
| 18 | V2M | capacitor |
| 19 | V2P | capacitor |
| 20 | V1N | capacitor |
| 21 | V1P | capacitor |
| 22 | DVDD | capacitor |
| 23 | IOVCC | Power 1.8-2.8V |
| 24 | VCC | Power +2.8V |
| 25 | GND | Ground |
| 26-33 | D0-D7 | LCD Data bus |
| 34 | DCLK | Clock signal |
| 35 | VS | Vertical Sync input |
| 36 | HS | Horizontal Sync input |
| 37 | SCL | Serial communication clock input |
| 38 | SDA | Serial communication data input |
| 39 | CS | Chip selection |
| 40 | VCOM | VCOM |
Pin Layout Details:
- Data Bus: D0-D7 (8-bit data bus)
- Control Signals: VS, HS, DCLK for timing control
- Serial Interface: SCL, SDA, CS for configuration
- Power Pins: Multiple power domains with capacitor connections
Absolute Maximum Ratings
| Parameter | Symbol | Min | Max | Unit |
|---|---|---|---|---|
| Supply voltage for logic | VDD | -0.3 | 3.3 | V |
| Input voltage for logic | VIN | -0.5 | VDD+0.3 | V |
| Supply current (one LED) | ILED | - | 20 | mA |
| Operating temperature | TOP | -20 | +70 | °C |
| Storage temperature | TST | -30 | +80 | °C |
Electrical Characteristics
| Item | Symbol | Min | Typ | Max | Unit | Applicable terminal |
|---|---|---|---|---|---|---|
| Supply voltage for logic | VDDI | 1.65 | 1.8 | 2.8 | V | IOVCC |
| Supply voltage (DC/DC) | VDD | 2.4 | 2.8 | 3.3 | V | VDD |
| Input voltage (Low) | VIL | VSS | - | 0.3×VDDI | V | - |
| Input voltage (High) | VIH | 0.7×VDDI | - | VDD | V | - |
| Input leakage current | ILKG | - | - | - | μA | - |
| LED Forward voltage | Vf | - | 3.2 | - | V | - |
| Input backlight current | ILED(one LED) | - | 15 | - | mA | - |
Power Supply Notes:
- Logic Supply: 1.65-2.8V typical at 1.8V
- DC/DC Supply: 2.4-3.3V typical at 2.8V
- LED Current: 15mA typical per LED (4 LEDs total)
Optical Characteristics
Basic Optical Parameters:
| ITEM | SYMBOL | CONDITION | MIN | TYP | MAX | UNIT | NOTE |
|---|---|---|---|---|---|---|---|
| Brightness | B | Viewing normal angle | TBD | 500 | TBD | Cd/m² | All left side data are based on SHENGJING's product reference only |
| Contrast Ratio | CR | Viewing normal angle | - | 500 | - | - | All left side data are based on SHENGJING's product reference only |
| Response Time | Tr+Tf | Viewing normal angle | - | 25 | 40 | ms | All left side data are based on SHENGJING's product reference only |
CIE Color Coordinates:
| Color | Coordinate | SYMBOL | CONDITION | MIN | TYP | MAX | NOTE |
|---|---|---|---|---|---|---|---|
| Red | X coordinate | XR | Viewing normal angle | 0.614 | 0.644 | 0.674 | All left side data are based on SHENGJING's product reference only |
| Red | Y coordinate | YR | Viewing normal angle | 0.290 | 0.320 | 0.350 | All left side data are based on SHENGJING's product reference only |
| Green | X coordinate | XG | Viewing normal angle | 0.270 | 0.300 | 0.330 | All left side data are based on SHENGJING's product reference only |
| Green | Y coordinate | YG | Viewing normal angle | 0.540 | 0.570 | 0.600 | All left side data are based on SHENGJING's product reference only |
| Blue | X coordinate | XB | Viewing normal angle | 0.104 | 0.134 | 0.164 | All left side data are based on SHENGJING's product reference only |
| Blue | Y coordinate | YB | Viewing normal angle | 0.097 | 0.127 | 0.157 | All left side data are based on SHENGJING's product reference only |
| White | X coordinate | Xw | Viewing normal angle | 0.267 | 0.297 | 0.327 | All left side data are based on SHENGJING's product reference only |
| White | Y coordinate | Yw | Viewing normal angle | 0.302 | 0.332 | 0.362 | All left side data are based on SHENGJING's product reference only |
Viewing Angle Specifications:
| Direction | SYMBOL | CONDITION | MIN | TYP | MAX | UNIT | NOTE |
|---|---|---|---|---|---|---|---|
| Horizontal (+) | θx+ | Center CR>=10 | - | 45 | - | Deg | All left side data are based on SHENGJING's product reference only |
| Horizontal (-) | θx- | Center CR>=10 | - | 45 | - | Deg | All left side data are based on SHENGJING's product reference only |
| Vertical (+) | θy+ | Center CR>=10 | - | 35 | - | Deg | All left side data are based on SHENGJING's product reference only |
| Vertical (-) | θy- | Center CR>=10 | - | 15 | - | Deg | All left side data are based on SHENGJING's product reference only |
| Uniformity | Un | - | - | 58 | - | % | - |
Optical Definitions
1. Viewing Angle Definition (θx and θy):
Normal: θx=0, θy=0°
12 o'clock direction: θx-=90°, θy+=90°
6 o'clock direction: θx+=90°, θy-=90°
2. Contrast Ratio Definition:
CR = Brightness of non-selected dots (white) / Brightness of selected dots (black)
3. Response Time Definition (TR):
| Time | Brightness |
|---|---|
| Tr | 10% |
| Tf | 90% |
Handling and Storage Cautions
8.1 Handling of LCM:
- ESD Protection: Be sure to ground the body when handling the LCM
- Mechanical Shock: Don't give external shock
- Surface Protection: Don't apply excessive force on the surface
- Liquid Crystal Safety:
- Liquid in LCD is hazardous substance. Must not lick and swallow
- When the liquid attaches to your hand, skin, cloth etc., wash it out thoroughly and immediately
- Electrical Limits: Don't operate it above the absolute maximum rating
- Disassembly: Don't disassemble the LCM
8.2 Storage Conditions:
- Temperature: Store in an ambient temperature of 5°C to 45°C
- Humidity: Relative humidity of 40% to 60%
- Light Exposure: Don't expose to sunlight or intensive ultraviolet rays
- Environment: Store in a clean environment, free from dust, active gas, and solvent
- ESD Protection: Store in anti-static electricity container
- Physical Load: Store without any physical load
Quality Inspection Standards
9.1 Visual & Function Inspection Standard
Inspection Conditions:
- Temperature: 25±5°C
- Humidity: 65%±10% RH
- Viewing Angle: Normal viewing angle
- Illumination: Single fluorescent lamp (300 to 700 Lux)
- Viewing Distance: 30-50cm
Zone Definitions:
- Zone A: Effective Viewing Area (Character or Digit can be seen)
- Zone B: Viewing Area except Zone A
- Zone C: Outside (Zone A+Zone B) which cannot be seen after assembly by customer
Note: As a general rule, visual defects in Zone C can be ignored when it doesn't affect product function or appearance after assembly by customer.
Sampling Plan:
- Standard: According to GB/T 2828-2003, normal inspection, Class II
- AQL: Major defect: 0.65, Minor defect: 1.5
Inspection Items and Criteria:
| No | Items to be inspected | Criteria | Classification |
|---|---|---|---|
| 1 | Functional defects | 1) No display, Open or miss line 2) Display abnormally, Short 3) Backlight no lighting, abnormal lighting 4) TP no function |
Major |
| 2 | Missing | Missing component | Major |
| 3 | Outline dimension | Overall outline dimension beyond the drawing is not allowed | Major |
| 4 | Color tone | Color unevenness, refer to limited sample | Minor |
| 5 | Soldering appearance | Good soldering, Peeling off is not allowed | Minor |
| 6 | LCD/Polarizer/TP | Black/White spot/line, scratch, crack, etc. | Minor |
Visual Defect Criteria
1.0 LCD Crack/Broken:
| Defect Type | Criteria | Note |
|---|---|---|
| Edge of LCD broken | X ≤ 3.0mm | X: Length |
| LCD corner broken | - | - |
2.0 Spot Defect (Φ=(X+Y)/2):
① Light Dot (LCD/TP/Polarizer black/white spot, light dot, pinhole, dent, stain):
| Zone Size (mm) | Zone A Acceptable Qty | Zone B Acceptable Qty |
|---|---|---|
| Φ ≤ 0.10 | Ignore | Ignore |
| 0.10 < Φ ≤ 0.15 | 3 (distance ≥ 10mm) | 3 (distance ≥ 10mm) |
| 0.15 < Φ ≤ 0.2 | 1 | 1 |
| 0.2 < Φ | 0 | 0 |
② Dim Spot (LCD/TP/Polarizer dim dot, light leakage, dark spot):
| Zone Size (mm) | Zone A Acceptable Qty | Zone B Acceptable Qty |
|---|---|---|
| Φ ≤ 0.1 | Ignore | Ignore |
| 0.1 < Φ ≤ 0.2 | 2 (distance ≥ 10mm) | 2 (distance ≥ 10mm) |
| 0.2 < Φ ≤ 0.3 | 1 | 1 |
| Φ > 0.3 | 0 | 0 |
③ Polarizer Accidented Spot:
| Zone Size (mm) | Zone A Acceptable Qty | Zone B Acceptable Qty |
|---|---|---|
| Φ ≤ 0.2 | Ignore | Ignore |
| 0.2 < Φ ≤ 0.5 | 2 (distance ≥ 10mm) | 2 (distance ≥ 10mm) |
Line Defect (LCD/TP/Polarizer black/white line, scratch, stain):
- Width ≤ 0.08mm: Define as spot defect
- Width > 0.08mm: Define as spot defect
3.0 Polarizer Bubble:
| Zone Size (mm) | Zone A Acceptable Qty | Zone B Acceptable Qty |
|---|---|---|
| Φ ≤ 0.2 | Ignore | Ignore |
| 0.2 < Φ ≤ 0.4 | 2 (distance ≥ 10mm) | 2 (distance ≥ 10mm) |
| 0.4 < Φ ≤ 0.6 | 1 | 1 |
| 0.6 < Φ | 0 | 0 |
4.0 SMT (Surface Mount Technology):
- Standard: According to IPC-A-610C class II standard
- Major Defects: Function defect and missing part
- Minor Defects: All others
5.0 TP (Touch Panel) Related:
TP Bubble/Accidented Spot:
| Size Φ(mm) | Zone A Acceptable Qty |
|---|---|
| Φ ≤ 0.1 | Ignore |
| 0.1 < Φ ≤ 0.2 | 2 |
| 0.2 < Φ ≤ 0.3 | 1 |
| 0.3 < Φ | 0 |
Assembly Deflection: Beyond the edge of backlight ≤ 0.15mm
TP Crack/Broken:
- TP Corner Broken: X ≤ 3.0mm, Y ≤ 3.0mm, Z < LCD thickness
- TP Edge Broken: X ≤ 6.0mm, Y ≤ 2.0mm, Z < LCD thickness
- Circuitry Broken: Not allowed
Functional Inspection Criteria
| Number | Items | Criteria (mm) |
|---|---|---|
| 1 | No display | Not allowed |
| 2 | Missing segment | Not allowed |
| 3 | Short | Not allowed |
| 4 | Backlight no lighting | Not allowed |
| 5 | TP no function | Not allowed |
Technical Features Summary
1. Display Performance:
- Resolution: 320×240 pixels (QVGA format)
- Color Depth: 65K colors (16-bit color)
- Brightness: 500 cd/m² typical
- Contrast Ratio: 500:1 typical
- Response Time: 25ms typical, 40ms maximum
2. Interface Capabilities:
- Primary Interface: 8-bit RGB parallel interface
- Control Interface: SPI for configuration (SCL, SDA, CS)
- Timing Signals: VS, HS, DCLK for video synchronization
- Data Bus: 8-bit (D0-D7) for pixel data
3. Power Management:
- Logic Supply: 1.8V typical (1.65-2.8V range)
- Display Supply: 2.8V typical (2.4-3.3V range)
- Backlight: 4 white LEDs, 15mA each typical
- Power Sequencing: Requires proper power-up sequence
4. Mechanical Design:
- Compact Size: 42.64×74.51×2.25mm
- COG Technology: Chip-on-Glass for space savings
- FPC Connector: 40-pin, 0.5mm pitch
- Viewing Direction: 6 o'clock orientation
Application Integration Guidelines
1. Mobile Phone Integration:
- Space Optimization: Compact design suitable for mobile devices
- Power Efficiency: Optimized for battery-powered operation
- Interface Compatibility: Standard RGB interface for mobile processors
- Reliability: Designed for mobile environment durability
2. Electrical Integration:
- Power Sequencing: Follow recommended power-up sequence
- Signal Integrity: Maintain proper timing for RGB signals
- ESD Protection: Implement ESD protection on interface lines
- Backlight Control: Proper current limiting for LED backlight
3. Mechanical Integration:
- Mounting: Secure mounting to prevent mechanical stress
- Connector: Proper FPC connector alignment and pressure
- Clearance: Maintain proper clearance around display edges
- Protection: Implement protective measures against impact
4. Software Integration:
- Driver Initialization: Proper initialization sequence for ILI8961 controller
- Timing Configuration: Set appropriate timing parameters for RGB interface
- Color Calibration: Adjust color settings for optimal display quality
- Power Management: Implement sleep/wake sequences for power saving
Development Support
1. Reference Materials:
- Datasheet: Complete electrical and mechanical specifications
- Application Notes: Integration guidelines for mobile applications
- Test Procedures: Quality verification and testing methods
- Compliance Documentation: ROHS and environmental compliance
2. Technical Support:
- Interface Guidance: RGB timing and signal requirements
- Power Management: Optimal power sequencing recommendations
- Troubleshooting: Common issues and solutions
- Customization: Limited customization options for volume orders
3. Quality Assurance:
- Testing Standards: Comprehensive visual and functional testing
- Defect Criteria: Clear acceptance criteria for various defects
- Sampling Methods: Statistical sampling per GB/T 2828-2003
- Reliability: Designed for mobile phone reliability requirements
Ordering Information
| Item | Specification |
|---|---|
| Model Number | LS030T04-R-V1 |
| Package Type | COG + FPC |
| Connector | 40-pin, 0.5mm pitch |
| Minimum Order | Contact factory for details |
| Lead Time | 6-8 weeks standard |
| ROHS Compliance | Yes |
| Documentation | Complete specification available |
Keywords for Technical Search
- Mobile Display: 3.0 inch mobile phone display, QVGA TFT for phone
- Interface: RGB interface display, 8-bit parallel interface
- Controller: ILI8961 display controller, COG technology display
- Specifications: 320x240 TFT, 65K color display, 500 cd/m² brightness
- Application: Mobile phone LCD module, portable device display
- Quality: ROHS compliant display, mobile-grade reliability
The LS030T04-R-V1 represents a mature, reliable display solution specifically optimized for mobile phone applications, offering a balance of performance, size, and power efficiency suitable for portable devices.
