Introduction
This document outlines the LS070I17-MP-V2, a 7.0-inch TFT-LCD module featuring an IPS panel for wide viewing angles and a "Bezel Open" design. This design maximizes the active display area relative to the module outline, offering a more immersive visual experience for end products.
Key Specifications
-
Basic Parameters:
- Screen Size (Diagonal): 7.0 inches
- Active Area (A.A.): 154.21 mm (H) x [Calculated] (V) (from spec: 154.21(A.A))
- Module Outline: 164.1 mm (H) x [Dimension from spec] (V)
- Resolution: 1024 x 3(RGB) x 600 pixels (1024x600, RGB stripe)
- Display Colors: 262K or 16.7M (as per "16.7M" in notes)
- Display Mode: Transmissive, Positive (Normally White)
- Panel Type: TFT LCD, IPS technology (from BOE IPS)
- Viewing Direction: All Clock (wide viewing angle)
-
Mechanical & Electrical:
- Driver IC: JD9165BA
- Interface: MIPI (inferred from pin names: MIPI_TDN, MIPI_TDP)
- Module Luminance: Value specified in cd/m² (from notes).
- Operating Temperature: -20°C to +60°C
- Storage Temperature: -10°C to +50°C
- Backlight: LED array configuration (e.g., "3串9并" - 3 series, 9 parallel), with specified Vf and If.
Application Scenarios
This module is ideal for:
- Car head-up displays (HUD) or center console systems.
- Home automation control panels and smart displays.
- Portable navigation devices and marine chart plotters.
- Industrial handheld terminals and POS systems.
- Consumer kitchen appliances with advanced interfaces.
Conclusion
The LS070I17-MP-V2 combines the visual benefits of IPS technology with a modern bezel-open design, providing a 7-inch display solution that is both visually appealing and space-efficient. Its specifications cater to applications where viewing angle, form factor, and display quality are important design considerations.
