LS1330I02-e-V1: 13.3-inch Color Active Matrix TFT LCD Module, Full HD 1920×1080, eDP Interface, 262K Colors, Low Reflection, COG+B/L+PCBA
Product Subtitle / Keywords
13.3 Inch Display, 1920×1080 FHD, Color Active Matrix a-Si TFT, eDP Interface, COG+B/L+PCBA Module Type, 262K Colors (6bit), 45% NTSC Color Gamut, Notebook PC Application, Low Reflection, High Color Type, Built-in LED Driver, RoHS Compliant, Lesson Smart Display Technology
1. Executive Summary And Product Positioning
The LS1330I02-e-V1 is a 13.3-inch color active matrix TFT LCD module using amorphous silicon TFT's (Thin Film Transistors) as an active switching devices. It is designed for high-performance Notebook PC applications.
This product specification (Revision 1.0) serves as the definitive technical document. It supports a Full-HD resolution of 1920 horizontal by 1080 vertical pixel array and can display up to 262k (6bit) colors.
This module features a low reflection and higher color type TFT-LCD panel, and the LED driver for back-light driving is built in. The unequivocal recommendation for engineers is to strictly adhere to the absolute maximum ratings, electrical specifications, and interface timing described herein to ensure reliable performance and compatibility.
2. Detailed Product Overview And Architecture
- Core Technology: Color active matrix TFT LCD module using amorphous silicon TFT's (Thin Film Transistors) as an active switching devices.
- Display Type: A low reflection and higher color type.
- Display Format: Graphic 1920 × 1080 pixel array (Full-HD resolution). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical stripe.
- Display Characteristics: Capable of displaying up to 262k (6bit) colors and color gamut 45%.
- Module Construction: COG (Chip-On-Glass) + B/L (Backlight) + PCBA.
- Interface Type: eDP (Embedded DisplayPort) interface.
- Backlight: LED driver for back-light driving is built in.
- Special Features: Low reflection and higher color type, thin and light weight, low driving voltage and low power consumption, Green Product (RoHS compliant).
- Approval Status: Approved Product Specification only (Revision 1.0).
3. Exhaustive Technical Specifications
3.1 Mechanical Specification
| Item | Specification |
|---|---|
| Module Size (H×V×D) | Not specified in the provided snippet |
| Active Area | 13.3 inch diagonally measured |
| Number of pixels | 1920(RGB) × 1080 |
3.2 Absolute Maximum Ratings
Note: Permanent damage to the device may occur if maximum values are exceeded functional operation.
The specific values for Absolute Maximum Ratings were not fully captured in the provided snippet, but the document includes a dedicated section (Section 5) for them.
3.3 Electrical Characteristics (LCD Drive)
| Parameter | Min. | Typ. | Max. | Unit | Remarks |
|---|---|---|---|---|---|
| Power Supply Voltage ($V_{DD}$) | 3.0 | 3.3 | 3.6 | V | Note 1 |
| Permissible Input Ripple Voltage ($V_{RF}$) | -10% VDD | - | +10% VDD | V | @ $V_{DD}$ = 3.3V |
| Power Supply Inrush Current (Inrush) | - | - | 2 | A | Note3 |
| Power Supply Current (Mosaic, $I_{DD}$) | - | - | 242 | mA | Note 1 |
| Power Supply Current (RGB, $I_{DD}$) | - | - | 333 | mA | Note 1 |
| Power Consumption (Mosaic, $P_{M}$) | - | - | 0.8 | W | Note 1 |
| Power Consumption (RGB, $P_{RGB}$) | - | - | 1.1 | W | Note 1 |
| Power Consumption (BLU, $P_{BL}$) | - | - | 2.25 | W | Note 2 |
| Power Consumption (Total, $P_{Total}$) | - | - | 3.05 | W | @Mosaic |
3.4 Backlight Unit (LED Driver)
| Parameter | Min. | Typ. | Max. | Unit | Remarks |
|---|---|---|---|---|---|
| LED Forward Voltage ($V_{F}$) | - | - | 2.9 | V | |
| LED Forward Current ($I_{F}$) | - | 20.3 | - | mA | |
| LED Power Input Voltage (VLED) | 5 | 12 | 21 | V | |
| LED Power Input Current ($I_{LED}$) | - | - | 187.5 | mA | Note 1 |
| LED Power Consumption ($P_{LED}$) | - | - | 2.15 | W | Note 1 |
Notes: Power supply voltage 12V for LED driver. The LED life-time define as the estimated time to 50% degradation of initial luminous.
4. Interface Connection (Pin Description)
The LS1330I02-e-V1 uses an eDP interface. The provided document snippet mentions an eDP Connector and eDP Input Signal, along with specific AUX CH and HPD characteristics, but does not provide the complete pin table in a parseable format.
5. Application Scenario
The LS1330I02-e-V1 is dedicated for Notebook PC applications. Its 13.3-inch diagonal size with Full-HD (1920×1080) resolution, low reflection, and higher color type make it a suitable choice for standard and performance notebooks.
6. Handling Precautions And Compliance
The LCD panel is made of glass and is fragile. The polarizer surface is easily scratched. The module should be handled with care to avoid applying pressure on the display area. ESD (Electrostatic Discharge) protection is mandatory throughout handling and assembly. The module should be stored in a clean, dry environment away from direct sunlight and corrosive gases. It is strongly recommended to read the full specification document (LS1330I02-e-V1 Product Specification Revision 1.0) before integration and to test the module under application-specific conditions. The manufacturer disclaims liability for damages resulting from improper use or modification. The product is RoHS compliant.
