News

LS215I03-L-V1: 21.5-inch FHD LCD Open Cell, 1920×1080, 2ch-LVDS Interface, 16.7M Colors (8-bit), Very High Contrast Ratio 3000:1, Monitor Products

LS215I03-L-V1: 21.5-inch FHD LCD Open Cell, 1920×1080, 2ch-LVDS Interface, 16.7M Colors (8-bit), Very High Contrast Ratio 3000:1, Monitor Products

Product Subtitle / Keywords

21.5 Inch Display, 1920×1080 FHD Resolution, Color Active Matrix LCD Open Cell, a-Si Thin Film Transistor, Transmissive Type, Normally Black Mode, 2ch-LVDS Interface, 16.7M Colors (8-bit), 495.6 ×292.2 ×10.7 mm Module Size, 478.656 ×260.28 mm Active Area, 5V Power Supply, Very High Contrast Ratio: 3000:1, Ultra Wide Viewing Angle: 178°(H)/178°(V) (CR≥10), 72% NTSC Color Saturation, Fast Response Time: 6.5ms, DE (Data Enable) Mode, Monitor Products, RoHS Compliant

1. Executive Summary And Product Positioning

The LS215I03-L-V1 is a color active matrix liquid crystal display with a light emitting diode (LED) backlight assembly without LED driver. It is specifically designed for Monitor products.

This product specification (Revision 1.0) serves as the definitive technical document. The matrix employs a-Si thin film transistor as the active element. This module is a diagonal 21.5" color active matrix LCD module with 2ch-LVDS interface, which open cell is a transmissive type display operating in the normally black mode. It supports 1920×1080 FHD resolution and can display up to 16.7M colors (8bit).

This module provides excellent performance which includes high contrast ratio, high color saturation and high color depth. The unequivocal recommendation for engineers is to strictly adhere to the absolute maximum ratings, electrical specifications, and interface timing described herein to ensure reliable performance and compatibility.

2. Detailed Product Overview And Architecture

  • Core Technology: Color active matrix liquid crystal display with a light emitting diode (LED) backlight assembly without LED driver. The matrix employs a-Si (amorphous silicon) thin film transistor (TFT) as the active element.
  • Display Mode: Transmissive type display operating in the Normally Black mode.
  • Display Format: Graphic 1920×1080 pixel array (FHD resolution). Each pixel is divided into Red, Green and Blue sub-pixels which are arranged in vertical stripe.
  • Display Characteristics: Capable of displaying up to 16.7 million colors (8-bit), NTSC 72%.
  • Interface Type: 2ch-LVDS (2-Channel Low-Voltage Differential Signaling) interface, DE (Data Enable) Mode.
  • Module Construction: Open Cell with backlight assembly.
  • Special Features: Very High Contrast Ratio (3000:1), Ultra Wide Viewing Angle (178°(H)/178°(V) (CR≥10)), 72% NTSC Color Saturation, Fast Response Time 6.5ms, RoHS compliant.
  • Approval Status: Approved Product Specification only (Revision 1.0).

3. Exhaustive Technical Specifications

3.1 Mechanical Specification

Item Specification Unit
Module size (H×V×D) 495.6 ×292.2 ×10.7 mm
Number of dots 1920(RGB) ×1080 pixel
Active area (H×V) 478.656 ×260.28 mm

3.2 Electrical Characteristics

Parameter Symbol Min. Typ. Max. Unit Note
Power Supply Voltage $V_{CC}$ 4.5 5 5.5 V (1)
Rush Current IRUSH - - 3 A (2)
Power Supply Current (White Pattern, 75Hz)   - 0.50 0.60 A (3)75Hz
Power Supply Current (Mosaic Stripe, 75Hz)   - 0.50 0.6 A (3)75Hz
Power Supply Current (Black Pattern, 75Hz)   - 0.50 0.6 A (3)75Hz
Power Supply Current (Horizontal Stripe, 75Hz)   - 0.91 1.10 A (3)75Hz
Power Supply Current (White Pattern, 60Hz)   - 0.47 0.57 A (3)60Hz
Power Supply Current (Mosaic Stripe, 60Hz)   - 0.46 0.55 A (3)60Hz
Power Supply Current (Black Pattern, 60Hz)   - 0.46 0.55 A (3)60Hz
Power Supply Current (Horizontal Stripe, 60Hz)   - 0.74 0.89 A 60Hz
Power Consumption (Mosaic Pattern, 75Hz) Poc -- 4.55 5.10 Watt 75Hz
Power Consumption (Mosaic Pattern, 60Hz) Poc -- 3.70 4.45 Watt 60Hz

3.3 LVDS Characteristics

Parameter Symbol Min. Typ. Max. Unit Note
Differential Input High Threshold Voltage $V_{TH}$ +100 - - mV (1)
Differential Input Low Threshold Voltage $V_{TL}$ - - -100 mV (1)
Common Input Voltage $V_{CM}$ 1.0 1.2 1.4 V (1)
Differential Input Voltage $|V_{ID}|$ 100 - 600 mV (1)
Terminating Resistor $R_{T}$ 87.5 100 112.5 ohm (1)

3.4 Timing Characteristics (LVDS)

Signal Item Symbol Min. Typ. Max. Unit
LVDS Receiver Clock Frequency Fclkin 64 74.25 96 MHz
Vertical Active Display Term Frame Rate F 48 60 75 Hz

3.5 Pin Description (Interface Connector - 30 Pins)

Pin No. Symbol Description Note
1 RO[0]N Odd LVDS Signal -  
2 RO[0]P Odd LVDS Signal +  
3 RO[1]N Odd LVDS Signal -  
4 RO[1]P Odd LVDS Signal +  
5 RO[2]N Odd LVDS Signal -  
6 RO[2]P Odd LVDS Signal +  
7 GND Ground  
8 ROCLK- Odd LVDS Clock -  
9 ROCLK+ Odd LVDS Clock +  
10 RO[3]N Odd LVDS Signal -  
11 RO[3]P Odd LVDS Signal +  
12 RE[0]N Even LVDS Signal -  
13 RE[0]P Even LVDS Signal +  
14 GND Ground  
15 RE[1]N Even LVDS Signal -  
16 RE[1]P Even LVDS Signal +  
17 GND Ground  
18 RE[2]N Even LVDS Signal -  
19 RE[2]P Even LVDS Signal +  
20 RECLK- Even LVDS Clock -  
21 RECLK+ Even LVDS Clock +  
22 RE[3]N Even LVDS Signal -  
23 RE[3]P Even LVDS Signal +  
24 GND Ground  
25 WP Write Protect (High: Write Enable, Low or Open: Write Disable ) (2)
26 SCL I2C Serial Clock (for adjust VCOM) (2)
27 SDA I2C Serial Data (for adjust VCOM) (2)
28 5V DC power supply  
29 5V DC power supply  
30 5V DC power supply  

3.6 Optical Characteristics

Test Conditions: Ta = 25°C. Measured with CSOT's BLU using S2000, ELDIM OPTI Scope-SA and ELDIM EZ contrast in dark room.

Item Symbol Condition Min. Typ. Max. Unit Note
Static Contrast Ratio CR θH=0°,θV=0° Normal direction at center point with CSOT's BLU 2000 3000 - - (1)(2)
Luminance of White   θH=0°,θV=0° Normal direction at center point with CSOT's BLU 200 250 - cd/m2 Center
Response Time (TL) TL θH=0°,θV=0° Normal direction at center point with CSOT's BLU - 6.5 12 ms (3)
Luminous Uniformity   θH=0°,θV=0° Normal direction at center point with CSOT's BLU 75 80 - %  
Crosstalk CT-2D θH=0°,θV=0° Normal direction at center point with CSOT's BLU - - 4% - (2)(5)

3.7 Color Chromaticity (CIE1931 - With CSOT's BLU)

Item Symbol Condition Min. Typ. Max. Unit Note
Color Chromaticity - Green GX θH=0°,θV=0° Normal direction at center point with CSOT's BLU Typ.-0.03 0.309 Typ.+0.03 - (2)(6)
Color Chromaticity - Green GY θH=0°,θV=0° Normal direction at center point with CSOT's BLU Typ.-0.03 0.622 Typ.+0.03 - (2)(6)
Color Chromaticity - Blue BX θH=0°,θV=0° Normal direction at center point with CSOT's BLU Typ.-0.03 0.154 Typ.+0.03 - (2)(6)
Color Chromaticity - Blue BY θH=0°,θV=0° Normal direction at center point with CSOT's BLU Typ.-0.03 0.051 Typ.+0.03 - (2)(6)
Color Gamut (NTSC) CG θH=0°,θV=0° Normal direction at center point with CSOT's BLU 68 72 - %NTSC (2)(6)

3.8 Viewing Angle

Item Symbol Condition Min. Typ. Max. Unit Note
Viewing Angle - Horizontal θH+ CR≥10 80 89 - Deg. (7)
Viewing Angle - Horizontal θH- CR≥10 80 89 - Deg. (7)
Viewing Angle - Vertical θV+ CR≥10 80 89 - Deg. (7)
Viewing Angle - Vertical θV CR≥10 80 89 - Deg. (7)

4. Application Scenario

The LS215I03-L-V1 is dedicated for Monitor products. Its 21.5-inch diagonal size with Full-HD (1920×1080) resolution, very high contrast ratio (3000:1 Typ.), ultra wide viewing angle (89° in all directions), and fast response time (6.5ms) make it an ideal choice for standard and professional desktop monitors, all-in-one PCs, and other display applications requiring high image quality and consistent viewing characteristics.

5. Handling Precautions And Compliance

The LCD panel is made of glass and is fragile. The polarizer surface is easily scratched. The module should be handled with care to avoid applying pressure on the display area. ESD (Electrostatic Discharge) protection is mandatory throughout handling and assembly. The module should be stored in a clean, dry environment away from direct sunlight and corrosive gases. It is strongly recommended to read the full specification document (LS215I03-L-V1 Product Specification Revision 1.0) before integration and to test the module under application-specific conditions. The manufacturer disclaims liability for damages resulting from improper use or modification. The product is RoHS compliant (CSOT open cell comply with RoHS for identification).

Related Articles

Eddie Chen
WhatsApp: +852 4614 8012
+86 15019200406 (WeChat)
HongKong Office: RM NO 43 U-MALL 1/F YUE MAN CTR KWUN TONG KL HONGKONG
Shenzhen Office: Room 2301,2302, Galaxy Times Building,Dalang North Road,Longhua District, Shenzhen
Factory Address: Building 4,2020 Factory, Industrial Park Zone2, Wanan County, Ji'an City, Jiangxi Province