LSC062I01-MP-V1: 6.2-Inch TFT LCD Module, 360x960 Resolution, MIPI Interface, Smart Display Solution
Product Subtitle / Keywords
6.2 Inch Display, 360(RGB)×960 Resolution, a-Si TFT-LCD Module, Transmissive, 16.7M Display Colors, COG+FPC+B/L+CTP Module Type, MIPI-DSI Interface (1 Data Lane + 1 Clock Lane), Driver IC GC9503CVM, Touch IC GT911, Operating Temperature -20°C to +60°C, Storage Temperature -30°C to +70°C, Supply Voltage VCC=2.8V (Typ), IOVCC=1.8V (Typ), Backlight IF=80mA, VF=16.8-19.2V, Module Outline 66.49×160.8×3.69 mm, Active Area 55.3×147.46 mm, RoHS Compliant, Spec Rev 1.0, Lesson Smart Display Technology Co., Ltd.
1. Executive Summary & Product Positioning
The LSC062I01-MP-V1, developed by Lesson Smart Display Technology Co., Ltd. (立信(万安)智显科技有限公司), is a transmissive type a-Si TFT-LCD (amorphous silicon thin film transistor liquid crystal display) module, which is composed of a TFT-LCD panel, a driver circuit and a backlight unit. The panel size is 6.2 inch and the resolution is 360(RGB)*960, the panel can display up to 16.7M colors. The module type is COG+FPC+B/L+CTP.
This product specification (Revision 1.0) serves as the definitive technical document, defining the module's general description, physical features (including outline dimension with detailed mechanical drawings and notes on cover glass, backlight, operating/storage temperature, and driver IC), mechanical specifications (module size and active area), electrical characteristics (including power supply voltages, input voltage levels, and backlight ratings), and module function description (including pin description for MIPI DSI, clock, reset, and backlight control), and timing characteristics for DSI data to clock channel.
The document provides the core parameters necessary for system integration into standard 6.2-inch widescreen display applications. The unequivocal recommendation for engineers is to strictly adhere to the mechanical and electrical specifications described herein to ensure reliable performance and compatibility.
2. Detailed Product Overview & Architecture
- Core Technology: Transmissive type a-Si TFT-LCD (amorphous silicon thin film transistor liquid crystal display) module, which is composed of a TFT-LCD panel, a driver circuit and a backlight unit.
- Display Resolution: Widescreen format: 360(RGB) × 960 pixel array.
- Display Mode: Transmissive, Normally Black.
- Module Construction: COG (Chip-On-Glass) + FPC (Flexible Printed Circuit) + B/L (Backlight) + CTP (Capacitive Touch Panel).
- Interface Type: The module uses a high-speed MIPI DSI (Display Serial Interface) with 1 data channel (D0P/D0N) and 1 clock channel (CLKP/CLKN) for pixel data and command/register configuration.
- Power Architecture: The module's driver IC GC9503CVM is powered by VCC (2.5V to 3.6V, Typ 2.8V) for the analog core and IOVCC (1.65V to 3.3V, Typ 1.8V) for the I/O interface and digital logic.
- Backlight: The backlight is configured as a dual-chip LED (双芯片LED) with a typical forward current of IF=80mA and a forward voltage range of VF=16.8V to 19.2V.
- Touch Panel: The module integrates a Capacitive Touch Panel (CTP) controlled by the GT911 IC. The touch interface uses the I2C protocol for communication.
- Driver IC (LCD): The module is driven by the GC9503CVM IC.
- Cover Glass: The module includes a cover glass (LENS) with a hardness of Asahi Glass ≥ 6H (750mg) and chemical strengthening conditions of CS ≥ 450MPa, DOL ≥ 8µm. The ink (black print) adhesion and thickness parameters are also specified.
- Supplier: 立信(万安)智显科技有限公司 (Lesson Smart Display Technology Co., Ltd).
3. Exhaustive Technical Specifications
3.1 Mechanical & Physical Specifications
| Item | Specification | Unit |
|---|---|---|
| Model | LSC062I01-MP-V1 | - |
| Display Size (Diagonal) | 6.2 | inch |
| Resolution | 360(RGB) × 960 | pixels |
| Display Type / Mode | Transmissive a-Si TFT-LCD, Active matrix TFT, Normally Black | - |
| Module Type | COG+FPC+B/L+CTP | - |
| Display Colors | 16.7M | colors |
| Module Size (H×V×D) | 66.49 × 160.8 × 3.69 | mm |
| Active Area (H×V) | 55.3 × 147.46 | mm |
| Main LCD Driver IC | GC9503CVM | - |
| Touch Controller IC | GT911 | - |
| Interface | MIPI DSI (1 Data Lane + 1 Clock Lane) | - |
| Backlight Type | Dual Chip LED | - |
| Cover Glass Hardness | Asahi Glass ≥ 6H (750mg) | - |
| Cover Glass Strengthening | CS ≥ 450MPa, DOL ≥ 8µm | - |
| Supplier | 立信(万安)智显科技有限公司 (Lesson Smart Display Technology Co., Ltd) | - |
3.2 Interface & Electrical Specifications
3.2.1 Recommended Operating Conditions (From Section 6 - Electrical Characteristics)
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage (Analog Core) | VCC | 2.5 | 2.8 | 3.6 | V |
| Supply Voltage (I/O Logic) | IOVCC | 1.65 | 1.8 | 3.3 | V |
| Input Voltage 'L' Level | VIL | VSS | --- | 0.3*IOVCC | V |
| Input Voltage 'H' Level | VIH | 0.7*IOVCC | --- | IOVCC | V |
| Backlight Forward Current | IF | - | 80 | - | mA |
| Backlight Forward Voltage | VF | 16.8 | 19.2 | - | V |
3.2.2 Pin Description (From Section 7-2, Key Pins)
The module uses a 17-pin FPC connector. Key pins include:
| PIN NO. | Symbol | I/O | Description |
|---|---|---|---|
| 1 | NC | - | No Connection |
| 2 | RESET | I | Global reset pin |
| 3 | IOVCC | P | Power voltage (I/O Logic, 1.8V) |
| 4 | VDD | P | Power voltage (Analog Core, 2.8V) |
| 5 | GND | P | Ground |
| 6 | D1P | I | MIPI differential data inputs (Lane 1 Positive) |
| 7 | D1N | I | MIPI differential data inputs (Lane 1 Negative) |
| 8 | GND | P | Ground |
| 9 | CLKP | I | MIPI differential clock inputs (Positive) |
| 10 | CLKN | I | MIPI differential clock inputs (Negative) |
| 11 | GND | P | Ground |
| 12 | D0P | I | MIPI differential data inputs (Lane 0 Positive) |
| 13 | D0N | I | MIPI differential data inputs (Lane 0 Negative) |
| 14 | GND | P | Ground |
| 15 | GND | P | Ground |
| 16 | GND | P | Ground |
| 17 | GND | P | Ground |
3.3 Timing Characteristics (From Section 8.8.3.2 High Speed Mode - Data Clock Channel Timing)
The specification provides key timing parameters for the MIPI DSI data-to-clock channel:
| Signal | Parameter | Min | Unit |
|---|---|---|---|
| DSI-Dn+/-, n=0 and 1 | tDS (Data to Clock Setup time) | 0.15x UI | ns |
| DSI-Dn+/-, n=0 and 1 | tDH (Clock to Data Hold Time) | 0.15x UI | ns |
Note: The display module has to meet timing requirements defined for the transmitter (MPU) on the MIPI D-Phy standard.
3.4 Environmental & Reliability Specifications (From Outline Dimension Notes)
| Parameter | Specification | Unit |
|---|---|---|
| Operating Temperature | -20 to +60 | °C |
| Storage Temperature (V1 Spec) | -30 to +70 | °C |
| Storage Temperature (Outline Note) | -30 to +80 | °C |
| RoHS Compliance | Compliant | - |
4. Application Guidelines & Critical Notes
Intended Use
- Standard 6.2-inch widescreen display applications (e.g., smart home devices, point-of-sale terminals, portable instruments, industrial controls).
- Systems requiring an integrated capacitive touch panel (CTP) for user interaction.
- Applications requiring a simple MIPI DSI interface with minimal lane count (1 data lane + 1 clock lane).
Critical Design Considerations
- Dual Power Supplies (VCC + IOVCC): The module requires two separate power rails: a 2.8V supply (VCC) for the analog core and a 1.8V supply (IOVCC) for the I/O logic. Proper power sequencing and decoupling are essential.
- MIPI DSI Interface with 1 Data Lane: The module uses a more basic MIPI DSI configuration with only one data lane (D0P/D0N) and one clock lane (CLKP/CLKN). Ensure the host processor supports this lower lane configuration.
- Backlight Power (80mA at ~19V): The backlight is driven by a dual-chip LED configuration requiring a constant current of 80mA at a forward voltage of 16.8V to 19.2V. An external boost converter with a constant-current LED driver is required.
- Integrated CTP (GT911): The module includes a capacitive touch panel controlled by the GT911 IC. The touch interface uses I2C communication. Ensure proper routing of TP_SDA, TP_SCL, TP_INT, and TP_RST signals.
- Reset Sequence: The module has a dedicated RESET pin. It should be driven low and then high according to the GC9503CVM driver IC initialization sequence.
- Module Dimensions: The module size is 66.49mm × 160.8mm × 3.69mm. The active area is 55.3mm × 147.46mm. The lens VA (Viewing Area) is 55.9mm × 148.46mm. The lens outer dimension (OD) is 66.49mm × 160.8mm.
- Storage Temperature Variation: Note that the V1 spec states a storage temperature range of -30°C to +70°C, while the outline drawing notes indicate -30°C to +80°C. For conservative design, assume -30°C to +70°C unless confirmed with the supplier.
Handling & Compliance
- Observe standard ESD precautions during handling and assembly.
- The module contains fragile glass – handle with care. Avoid mechanical stress on the active area, cover glass, or FPC.
- Do not attempt to disassemble or modify the LCD module.
- The module is RoHS compliant.
5. Conclusion & Design-In Support
The LSC062I01-MP-V1 specification details a 6.2-inch TFT LCD module with a 360x960 resolution, a 1-lane MIPI DSI interface, an integrated capacitive touch panel, and a simple dual-rail power supply — a cost-effective and practical solution for embedded applications requiring a modest-resolution widescreen display.
Key Strengths
- Widescreen 360x960 Resolution: Suitable for applications requiring a unique aspect ratio.
- Integrated Capacitive Touch Panel (CTP): Provides a complete touch display solution with standard I2C interface.
- Simple MIPI Interface (1 Data Lane): Easy to interface with low-cost microcontrollers that support basic MIPI DSI.
- Clear Technical Documentation: Comprehensive specs with pin description and basic timing parameters.
Main Design Focus
- The critical design tasks are implementing the dual-rail power supply (VCC=2.8V, IOVCC=1.8V) with decoupling, interfacing the host processor's MIPI DSI controller with correct differential signal routing (1 data lane + 1 clock lane), providing a constant-current LED backlight driver (80mA at ~19V), and integrating the touch panel via I2C protocol.
- Supporting requirements: Connect all ground pins (GND). Ensure the RESET pin is driven low for a proper initialization sequence.
This module is a reliable and practical choice for engineers designing embedded systems that require a widescreen display with integrated touch capability and a simple MIPI interface.
