LSC030I06-MP-V1 – 2.96″ 360×640 TFT LCD, ST7701SN CTP

1. General Description
The LSC030I06-MP-V1 is a transmissive type a-Si TFT-LCD module, composed of a TFT-LCD panel, a driver circuit, and a backlight unit. The panel size is 2.96 inches, resolution 360(RGB)×640, supporting up to 16.7M colors.

2. Physical Features

• Display Type: Transmissive a-Si TFT-LCD, IPS
• Module Type: COG+FPC+B/L+CTP
• Resolution: 360(RGB)×640
• Number of Colors: 16.7M
• Main LCD Driver: ST7701SN
• Backlight: 6 Chip-White LED in Series
• Operating Temperature: -20°C to +70°C
• Storage Temperature: -30°C to +80°C
• ROHS Compliance: Yes

Assembly Recommendations (from spec):

• Housing visible area suggested 0.3 mm smaller than VA on each side
• Foam opening suggested 0.6 mm larger than VA on each side
• TP edge must not contact metal conductors

3. Mechanical Specification

• Module size (H×V×D): 42.64 × 74.51 × 3.51 mm
• Active area (H×V): 36.72 × 65.28 mm
• Tolerance of segments to edge of glass: ±0.2 mm

4. Absolute Maximum Ratings

• VCC: -0.3 to 3.6 V
• IOVCC: -0.3 to 3.6 V
• Operating Temperature: -20 to 70 °C
• Storage Temperature: -30 to 80 °C

5. Electrical Characteristics

• VCC: 2.5 to 3.6 V (Typ. 2.8 V)
• IOVCC: 1.65 to 3.3 V (Typ. 1.8 V)
• VIH: ≥ 0.7×IOVCC
• VIL: ≤ 0.3×IOVCC

6. Interface & Pin Description

• Interface: MIPI DSI (1 clock pair, 2 data pairs)
• Key pins (25-pin FPC):
  • 1, 7, 11, 14, 17, 20, 21 (GND)
  • 2 (CTP_RST), 3 (CTP_SDA), 4 (CTP_SCL), 5 (CTP_INT), 6 (CTP_VDD)
  • 8 (VDD 2.8-3.3V), 9 (IOVCC 1.8V), 10 (RESET)
  • 12 (D0N), 13 (D0P) – MIPI data pair 0
  • 15 (CLKN), 16 (CLKP) – MIPI clock pair
  • 18 (D1N), 19 (D1P) – MIPI data pair 1
  • 22, 23 (LEDA), 24, 25 (LEDK) – Backlight

7. Reset Timing

• Reset pulse duration (TRW): 10 µs min
• Reset cancel time (TRT): 5 ms max (Note 1, 5); 120 ms max (Note 1, 6, 7)

8. Electro-Optical Characteristics (Ta=25°C)

• Response Time (Tr+Tf): 30 ms typ, 35 ms max
• Contrast Ratio: 1200 typ, 900 min
• Transmittance: 4.35% typ, 3.7% min
• White Chromaticity (CIE1931): x = 0.309, y = 0.347
• Viewing Angle (CR > 10): 80° (T/B/L/R)

Backlight Driving Condition: IF = 20 mA, Vf = 19.6 V (Typ.)

9. Inspection Standards

• AQL: According to GB/T 2828-2003; normal inspection, Class II
• Defect criteria defined for cracks, glass damage, polarizer defects, electrical defects (no display, missing line, mura, over current, etc.)

10. Records Of Version

• Revision: 1.0