LS028I26-S-V1 2.83 inch TFT-LCD Module 240x320 262k Colors IPS
1. Executive Summary & Product Positioning
The LS028I26-S-V1 is a 2.83-inch transmissive type a-Si TFT-LCD (amorphous silicon thin film transistor liquid crystal display) module developed by 立信(万安)智显科技有限公司 (Lesson Smart Display Technology Co., Ltd). It is composed of a TFT-LCD panel, a driver circuit, and a backlight unit. The panel size is 2.83 inch and the resolution is 240(RGB)*320, the panel can display up to 262k colors.
Product Positioning: This module features a 2.83-inch IPS (In-Plane Switching) panel, offering superior viewing angles (All Viewing) and high color performance. With a standard SPI (4-Line Serial) interface, it is well-suited for a wide range of applications such as industrial HMI, smart home devices, portable instruments, and other embedded display systems requiring wide viewing angles and high color accuracy.
2. Detailed Product Overview & Architecture
The module's architecture is designed for robust performance and easy integration. The primary components include:
- TFT-LCD Panel: 2.83-inch diagonal, a-Si TFT active matrix, transmissive, IPS mode. Resolution is 240(RGB) × 320 pixels with an active area of 43.2 (H) × 57.6 (V) mm.
- Driver IC: The module uses the JD9853 driver IC, communicating via an SPI (4-Line Serial) Interface.
- Backlight Unit (B/L): A white LED backlight with 4 Chip-White LEDs configured in parallel. The typical driving condition is IF=80mA, Vf=3V (TYP).
- Mechanical Construction: COG (Chip-on-Glass) + FPC + B/L. The module outline dimensions are 50.0 (H) × 69.1 (V) × 2.3 (D) mm.
- Interface: The module communicates via a 10-pin FPC connector. The display interface is 4-Line SPI (Serial Interface).
- Display Mode: Transmissive, IPS.
- Viewing Direction (Grayscale Inversion): All Viewing (IPS).
3. Exhaustive Technical Specifications
3.1 General & Mechanical Specifications
| Item | Specification |
| Display Size (Diagonal) | 2.83 inches |
| Resolution (Dots) | 240(RGB) × 320 |
| Display Technology | Active Matrix TFT, Transmissive, a-Si, IPS |
| Module Construction | COG+FPC+B/L |
| Color Depth | 262K Colors |
| Viewing Direction (Grayscale Inversion) | All Viewing (IPS) |
| Input Data Interface | SPI (4-Line Serial) |
| Driver IC | JD9853 |
| Module Size (H×V×D) | 50.0 × 69.1 × 2.3 mm |
| Active Area (AA, H×V) | 43.2 × 57.6 mm |
| Pixel Arrangement | RGB Dot-matrix (240(RGB)×320) |
| Display Mode | Active matrix TFT, Transmissive type |
| Backlight Type | 4 Chip-White LED, Parallel |
| Operating Temperature | -10°C to +60°C |
| Storage Temperature | -20°C to +70°C |
3.2 Absolute Maximum Ratings
Stress beyond those listed may cause permanent damage.
| Item | Symbol | Min | Max | Unit | Remark |
|---|---|---|---|---|---|
| Supply voltage | VCC | -0.3 | 4.6 | V | Note1 Note2 |
| Supply voltage | IOVCC | -0.3 | 4.6 | V | Note1 Note2 |
| Operating temperature | TOPR | -10 | 60 | °C | Note1 Note2 |
| Storage temperature | TSTR | -20 | 70 | °C | Note1 Note2 |
3.3 Electrical Characteristics
3.3.1 Recommended Operating Conditions
Condition: VDDI=1.65 to 3.3V, VDD=2.4 to 3.3V, AGND=DGND=0V, Ta=25°C.
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply voltage | VCC | 2.4 | 2.8 | 3.3 | V |
| I/O supply voltage | IOVCC | 1.65 | 1.8 | 3.3 | V |
3.3.2 Backlight LED Characteristics
The backlight consists of 4 Chip-White LEDs in Parallel. The backlight drive condition is IF=80mA, Vf=3V (TYP).
| Parameter | Symbol | Typ | Unit |
|---|---|---|---|
| Forward Voltage | Vf | 3 | V |
| Forward Current | If | 80 | mA |
3.4 Interface Pin Assignment (10-Pin FPC)
Connector: 10-pin FPC. Interface: 4-Line SPI (Serial Interface).
| PIN NO. | Symbol | I/O | Description |
|---|---|---|---|
| 1 | LEDK | P | Power for LED backlight cathode. |
| 2 | NC | -- | No connection. |
| 3 | NC | -- | No connection. |
| 4 | NC | -- | No connection. |
| 5 | RESE | I | This signal will reset the device and it must be applied to properly initialize the chip. |
| 6 | CS | I | Chip selection pin. |
| 7 | SDA | I | SPI interface input pin. |
| 8 | SCL | I | Serial clock pin in serial interface mode. |
| 9 | RS | I | Display data/command selection pin in parallel interface. It functions as the D/CX pin for SPI interface. |
| 10 | GND | P | Ground. |
3.5 Timing Characteristics
3.5.1 4-Line Serial Interface Characteristics
Test conditions: VDDI=1.65 to 3.3V, VDD=2.4 to 3.3V, AGND=DGND=0V, Ta=25°C.
Note: The timing parameters for this module are listed as TBD (To Be Determined) in the specification. The values below are derived from the related LS028I26-S-V1 specification for reference only. For precise timing, please consult the official datasheet.
| Signal | Symbol | Parameter | MIN | MAX | Unit | Description |
|---|---|---|---|---|---|---|
| CSX | TCSS | Chip select setup time (write) | 15 | -- | ns | - |
| CSX | TCSH | Chip select hold time (write) | 15 | -- | ns | - |
| CSX | TCSS | Chip select setup time (read) | 60 | -- | ns | - |
| CSX | TSCC | Chip select hold time (read) | 65 | -- | ns | - |
| CSX | TCHW | Chip select "H" pulse width | 40 | -- | ns | - |
| SCL | TSCYCW | Serial clock cycle (Write) | 16 | -- | ns | -write command & data ram |
| SCL | TSHW | SCL "H" pulse width (Write) | 7 | -- | ns | -write command & data ram |
| SCL | TSLW | SCL "L" pulse width (Write) | 7 | -- | ns | -write command & data ram |
| SCL | TSCYCR | Serial clock cycle (Read) | 150 | -- | ns | -read command & data ram |
| SCL | TSHR | SCL "H" pulse width (Read) | 60 | -- | ns | -read command & data ram |
| SCL | TSLR | SCL "L" pulse width (Read) | 60 | -- | ns | -read command & data ram |
| D/CX | TDCS | D/CX setup time | 10 | -- | ns | - |
| D/CX | TDCH | D/CX hold time | 10 | -- | ns | - |
| SDA (DIN) | TSDS | Data setup time | 7 | -- | ns | - |
| SDA (DIN) | TSDH | Data hold time | 7 | -- | ns | - |
| DOUT | TACC | Access time | 10 | 50 | ns | For maximum CL=30pF |
| DOUT | TOH | Output disable time | 15 | 50 | ns | For maximum CL=30pF |
3.5.2 Reset Timing
Test conditions: VDDI=1.65 to 3.3V, VDD=2.4 to 3.3V, AGND=DGND=0V, Ta=25°C.
| Related Pins | Symbol | Parameter | MIN | MAX | Unit |
|---|---|---|---|---|---|
| RESX | TRW | Reset pulse duration | 10 | - | us |
| RESX | TRT | Reset cancel | - | 5 (Note 5) | ms |
| Reset cancel | - | 120 (Note 6, 7) | ms |
3.6 Design Notes from Documentation
- B/L Driver: The backlight driving condition is IF=80mA, Vf=3V (TYP) for 4 parallel LEDs.
- Mechanical: Tolerance of segments to edge of glass: ±0.2mm. The FPC includes PI reinforcement with a total thickness of 0.3mm (FPC+PI补强). Yellow insulating tape is used for protection. Easy-tear sticker is provided for FPC handling.
- Housing: It is recommended that the housing visual area be at least 0.3mm smaller than the VA (Viewing Area) on each side. The housing foam window should be at least 0.6mm larger than the VA on each side. TP edge should not contact metal conductors to avoid ESD or short circuit risks.
- RoHS: RoHS compliance is expected.
4. Application Guidelines & Critical Notes
- Power Supply: The module requires a 2.8V (Typ.) power supply for VCC and 1.8V (Typ.) for IOVCC. Ensure the power supply ripple is minimized.
- Interface: This module uses a standard 4-Line SPI (Serial Interface) protocol. The host microcontroller must be configured for this protocol, managing signals such as CS, RS (D/CX), SCL, and SDA.
- Backlight Driver (External): An external constant current driver is required to supply a typical current of 80mA at a forward voltage of 3.0V.
- Reset: A hardware reset pin (RESE, Pin 5) is provided. A low pulse of at least 10µs is required for a valid reset.
- Handling Precautions: Handle the module with care to avoid damage to the glass or FPC. Ground yourself to prevent electrostatic discharge (ESD).
5. Conclusion & Design-In Support
The LS028I26-S-V1 from Lesson Smart Display Technology is a 2.83-inch TFT-LCD module with an IPS panel. It is a high-color-performance, wide-viewing-angle display solution suitable for a wide variety of embedded display applications such as industrial HMI, smart home devices, and portable instruments.
For successful design-in, engineers should:
- Obtain and review the complete, official Product Specification (Revision 1.0) for the full mechanical drawing and the JD9853 driver IC datasheet for detailed command initialization.
- Design a clean 2.8V/1.8V power supply and a backlight constant current driver circuit capable of delivering 80mA at 3.0V.
- Configure the host MCU's SPI interface to match the timing specifications detailed in this datasheet.
- Contact the manufacturer for evaluation modules, sample requests, and further technical support during the design-in phase.
This module is designed to provide a reliable and vibrant display solution for a wide array of applications.
